The red color doesn’t come out, then comes out again, then doesn’t come out again

The red color doesn’t come out, then comes out again, then doesn’t come out again

 

I’m summarizing UV printer problems and solutions.

The link below is a compilation of all the problems and causes and solutions that occurred over the past 5 years, totaling 24 episodes. If you have a printer that uses the damper method, you can solve most problems by just clicking the link below.

Ink supply issue and solution summary

 

Now, I’m organizing the problems and symptoms related to UV Printer heads.

Before dealing with the actual problems and solutions, there are many misconceptions about heads, so I’ll explain the basic knowledge first.

If you understand only the sessions explained here, you will be able to see that you know more about inkjet heads than inkjet manufacturer salespeople or equipment distributor engineers.

Head Basics Summary

 

Last time, I explained why the following problem occurred.

1. Banding appears on the Y axis instead of the X axis. Click here for more details.

2.”Can I clean the XP600 head, which is an Epson series head, with alcohol?”

3. Problem symptoms that occur when the print head data cable connection part is contaminated with ink

4. “It was printing fine until yesterday, but suddenly a certain color is flying away.”

5. “Won’t the nozzle get clogged when printing on highly reflective materials such as mirrors?”

6. “I haven’t used it for a month, but the white color doesn’t come out. Is it possible to recover it?”

7. “It prints, but the colors are weird.”

8. “I see blue banding due to nozzle aging. Is there a tip that I can use to fix this immediately without replacing the head?”

9. “Even though I replaced the head, the same specific color doesn’t come out at all.”

10. “The printer prints, but no ink comes out.” 

 

Today, I will explain the problem of magenta not appearing at the beginning of printing, then appearing again in the middle, and then not appearing again.

 

 

I. Problem Symptoms _The red color doesn’t come out, then comes out again, then doesn’t come out again

1. Picture _The red color doesn’t come out, then comes out again, then doesn’t come out again

 

Since most of my work is acrylic goods, he prints in the Color => White, Reverse format.

If you look at the hand image in the image above, the first section is expressed in yellow, and then in the back, the color is expressed properly as the red color flows back.

2. Additional symptoms _The red color doesn’t come out, then comes out again, then doesn’t come out again

“Manager, the image is printed normally from the back, so it doesn’t seem to be a DATA problem, but rather an ink supply issue.”

“I’m worried because there is no regularity.”

“First, I’ll replace the Captop and check the symptoms.”

 

There was a problem where ink suddenly ran out during printing in the past, and I explained the details.

If ink suddenly runs out during printing, please click here.

 

The next day, I got another call.

“Team leader, if you have time, I’d like to ask you to come on a business trip tomorrow. I need to replace the PC and install a new program, and the current problem has been improved, but it hasn’t been resolved.”

“Okay, I understand.”

“By the way, when I lift the print head and look underneath, I can see red around the print head protection metal.”

“The magenta line inside the head may have burst. I’ll arrive early tomorrow morning.”

II. Check the problem _The red color doesn’t come out, then comes out again, then doesn’t come out again

1. ARTJET test image is normal, but _The red color doesn’t come out, then comes out again, then doesn’t come out again   

There may be an ink supply problem, so I checked the following and it was normal.

• After replacing the captop, I checked cleaning and pumping
• Since the red series was the problem, I removed the magenta and Lm dampers and pulled them with a syringe, and the ink came out without bubbles.

 

To check if it is a DATA problem, I also printed the ARTJET Test image.

• The image was printed normally without any ink loss.
• The ARTJET TEST image may come out normally because there is not much red in the color series,
• and colors with a lot of red in the color series may lose ink as before.

 

2. Print head replacement _The red color doesn’t come out, then comes out again, then doesn’t come out again    

The official name of the XP600 head is FA1080-a1. It is a low-cost head with a short lifespan.

The place I visited was used for 1 year and 6 months, and this is a lucky case.

 

When I loosened the bolt and lifted the head, it tilted to the side, and red appeared and accumulated in the tilted area.

It was a symptom of a magenta or light magenta pipe bursting inside the head.

After replacing the head, I printed the image that had been problematic, and there was no problem.

 

After printing, raised the carriage and looked at the head surface,

If ink is splattered in all nozzles of a specific channel among the 6 channels,

or if a specific ink is spread throughout the head like now,

This may be a problem caused by a burst ink pipe inside the head.

In this case, you should replace the head.

 

III. This is how ARTJET supports our customers.

One thing I feel while selling and maintaining ARTJET UV Printers for 5 years is that the next most important thing after product stability is Troubleshooting DATA.

All products have problems, whether they are actual equipment problems or consumer errors, and product stability is how easily and quickly you solve those problems.

We are organizing all the troubleshooting DATA as follows.

You can see the product print quality by clicking here.

 

1. Complete Guide to Printhead Problems and Solutions

ARTJET UV Printer Problems and Solution _Printhead Problems Summary

Additional issue and solution
The red color does not appear at first, then appears during printing, and then does not appear again
Printhead replacement video and precautions

2. Complete Guide to Ink Supply Problems and Solutions

Previously sorted, ink supply problem summary
Updated ink supply problem summary

 

3. Mechanical problem and Solutions 

1. How to align the print head in a straight line
2. There is a clicking noise from the X-axis
3. Banding problem in specific section
4. The Importance of Head Height in Bidirectional Printing
5. Problems that occur when the wiper height is high
6. When the cleaning belt screw is loose
7. When the capping fixing plate does not fit
8. How do I prepare the ARTJET electricity?
9.When Anti-crash becomes a jam in captop
10. Print head Anti crash system 

 

4. Electron board and Software problem is hereunder. 

1. The printer works but printing does not work
2. Resetting to default settings
3. Touch panel does not turn on
4. The printer is printing, but nothing is printed
5. Software closes when I just press the print button
6. Printing in the wrong place
7. Positioning misalignment in X-axis direction
8. How to make the Offset fine tune
9. Vertical offset is not correct only for the right section of white
10. Software turn off when click print button

 

5. Sai Flexi Rip software  

1. How to make the Spot Color & several mistakes
2. Color is strange after applying Spot color
3. White is sticking out
4. Installation and Dongle Key Recognition Failure Measures
5. Dongle Key Recognition Failure
6. White lines appear when printing only color
7. Color Adjustment through Graph
8. Print size compensation
9. Ink Consumption Calculation
10. What is ICC profile & menu board UV Printing
11. Dongle Key recognition Failure from USB port

 

6. Problems and solutions from actual consumer sites

1. Paper that absorbs ink
2. A line-like thing appears at the end of the white print surface
3.Can varnish banding be reduced?
4. Are there many problems with China’s UV Printer?

7. UV Printer Application 

we are explaining not only UV printer problems and solutions, but also what products are produced with UV printers.

1. Braille printing
2. Flip the material and align it
3. 2.5D UV print
4. ARTJET UV Printer Application 6 _아크릴 본딩 장비
5. I phone 14 print limitation 
6. Mask printing not recommend
7. Leather Cigarette Case UV Printing
8. Round soccer strategy board UV printing
9. Primer  performance & limitation 
10. UV Print & Laser crop mark cutting
11. Mobil case UV print profit
12. Screen vs Digital Comparison and UV Printing on Hand Sanitizer Cases
13. Bottle zig & print
14. Canvas UV Printing
15. Applying epoxy effect with varnish
16. Making a light frame with UV Printer & Laser cutter
17. UV Printer & Laser Cutting Equipment Button Name Tag Making
18. UV Printer & Laser Cutting Making a Cell Phone GripTok
19. Making an Acrylic Keychain with UV Printer & Laser Cutter
20. UV Print with Zig
21. How to make RD WORKS CCD camera cutting Video manual
22. Acrylic bonding equipment
23. All the steps to create UVDTF
24. UVDTF TEST Result on various material
25. ARTJET CW+C Print time & Ink Cost
26. Create a white shield with different images on the front and back of the keyring
27. Keyring Business Required Equipment and Investment Costs
29. Acrylic Lighting Goods
30. Ballpoint pen jig printing
31. Staining occurs when printing on coated leather

 

 

That’s it for today.