When Anti-crash becomes a jam in captop ARTJET 2025

When Anti-crash becomes a jam in captop

I. Problem _When Anti-crash becomes a jam in captop

1. Anti crash function _When Anti-crash becomes a jam in captop  

UV printers use LED light to fix ink to various material surfaces.

Since the materials are diverse, the thickness of each material is different, and the LED light generates heat during printing.

Materials that are weak to heat may become deformed by the heat during printing, causing the height to change.

For this reason, UV printers have an anti-crash device installed slightly below the head height to protect the print head.

In other words, before the print head touches the surface of the material and the nozzle is damaged, the anti-crash first hits the material and stops printing, protecting the print head.

 

2. When Anti crash is jammed in the capping station due to malfunction, _When Anti-crash becomes a jam in captop

When using the printer, various problems occur,

In particular, the cases where Anti-crash becomes a jam are as follows.

When initializing ARTJET, when placing the material on the flatbed and not turning on the vacuum,

When checking each axis, Anti-crash operates on the material on the flatbed and cannot perform the next operation,

When the printer stops while the capping station is raised,

That is, Anti-crash is tightly caught by the raised capping station, Anti-crash cannot come down, and Anti-crash continues to operate.

You can think of it as the Emergency button being pressed continuously.

In this state, even if you turn the power off and on again and operate ARTJET Software, Anti-crash is still operating, so it does not proceed any further.

 

II. Solution _When Anti-crash becomes a jam in captop

1. How to lower the capping station manually _When Anti-crash becomes a jam in captop   

In order to release the anti-crash that is jammed in the capping station, the capping station must be lowered.

All operations are not possible when the power is on, and when the power is off, lower the capping station as shown in the video below.

 

One thing to be careful of is that if you lower it too much, you may exceed the capping station height threshold, so stop lowering the capping station at a level where the head carriage can move.

 

ARTJET UV Printer Consumer Problems and Solutions 9 _ When Anti-crash becomes a jam in captop

 

2. Just in case, please release the Anti crash pillar again _When Anti-crash becomes a jam in captop

Please also perform the following tasks to check if the anti-crash pillar is properly released.

Occasionally, the same error message may appear because the anti-crash pillar is not properly released. In this case, please also perform the following tasks.

 

When Anti-crash becomes a jam in captop

 

III. This is how Artjet supports our customers.

 

One thing I feel while selling and maintaining ARTJET UV Printers for 5 years is that the next most important thing after product stability is Troubleshooting DATA.

All products have problems, whether they are actual equipment problems or consumer errors, and product stability is how easily and quickly you solve those problems.

Since words alone are not convincing, we are organizing all the troubleshooting DATA as follows,

and sharing the Daily nozzle test through ARTJET demo equipment.

 

1. Printhead Problems and Solutions Total 10

ARTJET UV Printer Problems and Solution_Printhead Problems Summary

Additional issue and solution
The red color does not appear at first, then appears during printing, and then does not appear again

 

2. Ink Supply Problems and Solutions Total 17

ARTJET UV Printer Problems and Solutions_Ink Supply Problems Summary

Comprehensive application
Damper replacement time
The nozzle test is fine, but it seems that a certain color is not coming out during printing
Capping station block positioning to match the print head and captop
Can I ignore the ink alarm and use it?
UV Printer Monday Morning Routine

3. Mechanical problem and Solutions 

1. How to align the print head in a straight line
2. There is a clicking noise from the X-axis
3. Banding problem in specific section
4. The Importance of Head Height in Bidirectional Printing
5. Problems that occur when the wiper height is high
6. When the cleaning belt screw is loose
7. When the capping fixing plate does not fit
8. How do I prepare the ARTJET electricity?
9.When Anti-crash becomes a jam in captop
10. Print head Anti crash system 

 

4. Electron board and Software problem is hereunder. 

1. The printer works but printing does not work
2. Resetting to default settings
3. Touch panel does not turn on
4. The printer is printing, but nothing is printed
5. Software closes when I just press the print button
6. Printing in the wrong place
7. Positioning misalignment in X-axis direction
8. How to make the Offset fine tune
9. Vertical offset is not correct only for the right section of white

 

5. Sai Flexi Rip software  

1. Sai Flexi Rip _ How to make the Spot Color & several mistakes
2. Sai Flexi Rip _ Color is strange after applying Spot color
3. Sai Flexi Rip _ White is sticking out
4. Sai Flexi Rip _ Installation and Dongle Key Recognition Failure Measures
5. Sai Flexi Rip _ Dongle Key Recognition Failure
6. Sai Flexi Rip _ White lines appear when printing only color
7. Sai Flexi Rip _ Color Adjustment through Graph
8. Sai Flexi Rip _ Print size compensation
9. Sai Flexi Rip _ Ink Consumption Calculation
10. What is ICC profile & menu board UV Printing
11. Sai Flexi Rip _ Dongle Key recognition Failure from USB port

 

6. Problems and solutions from actual consumer sites

1. Paper that absorbs ink
2. White Motor Pump Does Not Turn
3. A line-like thing appears at the end of the white print surface
4.Can varnish banding be reduced?
5. Are there many problems with China’s UV Printer?

7. UV Printer Application 

we are explaining not only UV printer problems and solutions, but also what products are produced with UV printers.

1. Braille printing
2. Flip the material and align it
3. 2.5D UV print
4. ARTJET UV Printer Application 6 _아크릴 본딩 장비
5. I phone 14 print limitation 
6. Mask printing not recommend
7. Leather Cigarette Case UV Printing
8. Round soccer strategy board UV printing
9. Primer  performance & limitation 
10. UV Print & Laser crop mark cutting
11. Mobil case UV print profit
12. Screen vs Digital Comparison and UV Printing on Hand Sanitizer Cases
13. Bottle zig & print
14. Canvas UV Printing
15. Applying epoxy effect with varnish
16. Making a light frame with UV Printer & Laser cutter
17. UV Printer & Laser Cutting Equipment Button Name Tag Making
18. UV Printer & Laser Cutting Making a Cell Phone GripTok
19. Making an Acrylic Keychain with UV Printer & Laser Cutter
20. UV Print with Zig
21. How to make RD WORKS CCD camera cutting Video manual
22. Acrylic bonding equipment
23. All the steps to create UVDTF
24. UVDTF TEST Result on various material
25. ARTJET CW+C Print time & Ink Cost
26. Create a white shield with different images on the front and back of the keyring
27. Keyring Business Required Equipment and Investment Costs
29. Acrylic Lighting Goods
30. Ballpoint pen jig printing
31. Staining occurs when printing on coated leather

 

 

That’s it for today.