Flip the material over and print it in the correct position ARTJET 2025

Flip the material over and print it in the correct position

 

So far,  UV printer-related issues, We’ve compiled

24 articles on ink supply issues,
9 articles on head basics,
12 articles on actual head issues and their solutions,
10 actual mechanical Machine Problems and Solutions.
12 Problems and Solutions of Electronic Boards and SW Actually Issued
11 Problems and Solutions: Sai Rip Installation and Basic Settings, Spot Color Creation, and More

For related information, click on the article to go to the link.

 

Now, I’m explaining about the products that can be made with a UV Printer.

1. How to print in Braille

 

Today, we’ll address a question often asked by those familiar with UV printers.

“When printing on the front side and then flipping the material over to print another image on the back, can the front and back sides be aligned precisely?”

I. Print Image Description _Flip the material over and print it in the correct position

1. The printing material is transparent material _Flip the material over and print it in the correct position

This is a 1.5t transparent acrylic material.
For the front and back images to match exactly when flipped, the material must be transparent.

You might think, “Square material, with each edge at 90 degrees,” but measuring the angle of the material doesn’t result in an exact 90-degree angle.
Because it’s not a square or rectangle, if you align the position based on one edge, the other end will be slightly off the intended position.
If you flip the material upside down and print, the starting point may be correct, but the end point may not be.

If the material isn’t transparent, like a standard Form-X,

• the material itself must have crop marks,
• and the UV printer flatbed must also have registration marks.
• You can use these as a reference for positioning.

2. Print image _Flip the material over and print it in the correct position

In the photo above,

The front of the acrylic was printed entirely in white, while the letters and Braille were rendered in color.

The back of the acrylic, i.e., the material, was flipped over to align the position.
The Braille was printed in raised form over the Braille rendered in color using a layer of varnish.

The black dots beneath the varnish were illuminated, rendering the Braille in black.

 

II. Full white color printing _Flip the material over and print it in the correct position

1. Rip settings _Flip the material over and print it in the correct position

Rip First Screen

The ARTJET UV Printer automatically flips the image when printing on the back, eliminating the need to select the “Mirror” option in Rip.

Do not select the image mirror option; simply set it to “F.”

In the image rotation option, the person’s head is oriented in the “<=” direction.

Rip, fourth screen

Select “Material” in the Spot_1 White options window. Print all images in white.
In the Spot_2 Varnish options window, select “None” since only white is needed.

 

2. Setting printer program options _Flip the material over and print it in the correct position

In the Menu => Spot color options window,

select “Reverse print” for reverse printing

White density is 50% (6ch x 40% = 300% white density)

 

Print mode is bidirectional output, Quality mode

III. Create a location on the transparent film and print the first image _Flip the material over and print it in the correct position

1. After printing on transparent film, leave only the border _Flip the material over and print it in the correct position  

To flip the material and align it, you need to mark the position.

Positioning the Transparent Material

• Place the transparent material on the plate.
• The vacuum must remain on at all times to prevent any subsequent changes in position.
• Fix the top of the transparent material with tape to ensure it remains in its original position.

Print the first image on the back.

 

Once printing is complete,

• cut off the center, leaving only the white edges, as shown in the photo below.
• If the center is not cut, the vacuum force that holds the acrylic material will not be transmitted,
• and the LED heat during printing may cause the material to bend and hit the print head.
• For this reason, the center must be cut off.

2. First image printed on acrylic material _Flip the material over and print it in the correct position  

Place the transparent acrylic sheet to be printed on a flatbed.

Fix the edges where the vacuum is blocked by the film with tape.

 

After changing the print height to Acrylic thickness, the image printed on transparent film is printed on acrylic.

Only white and color are printed.

IV. Flip the material and print the second image_Flip the material over and print it in the correct position

1. Flip the material _Flip the material over and print it in the correct position  

Once printing is complete, flip the material over in the direction of the left and right arrows as shown in the photo below, not up and down.

 

Turn the material over and place it exactly on the white border remaining on the transparent film.

 

As with the first image print, secure the edge where the vacuum is blocked with tape.

2. Setting Rip Options _Flip the material over and print it in the correct position

This is the options window used when printing the first image.

For the second image, as shown below:

• Select Mirror
• Change the head orientation to “=>”

3. Setting printer program options _Flip the material over and print it in the correct position

Simply print using the same “Reverse” option as the first print.

If the first image was printed in reverse, the second image should also be printed in reverse.

For instructions on using Varnish to display Braille in your printer program, please refer to the link below.

1. How to print in Braille

 

You can also watch the video of what I explained today by clicking here.

 

V. This is how ARTJET supports our customers.

One thing I feel while selling and maintaining ARTJET UV Printers for 5 years is that the next most important thing after product stability is Troubleshooting DATA.

All products have problems, whether they are actual equipment problems or consumer errors, and product stability is how easily and quickly you solve those problems.

We are organizing all the troubleshooting DATA as follows.

You can see the product print quality by clicking here.

 

1. Additional information on printhead problems

Please refer to the information summarized above, and there is no additional information summarized yet.

 

2. Additional information on ink supply issues

Please refer to the information summarized above, and the additional information summarized below is as follows.

Addition

“no clogged nozzles, but banding in the red ARTJET 2025”
“When I print it, the whole thing has a yellow tint to it”

 

3. Additional information on Mechanical issues 

Please refer to the information summarized above, and there is no additional information summarized yet.

4. Additional information on Electron board and Software issues 

Please refer to the information summarized above, and there is no additional information summarized yet.

5. Additional information on Sai Flexi Rip software  

Please refer to the information summarized above, and there is no additional information summarized yet.

6. Problems and solutions from actual consumer sites

1. Paper that absorbs ink
2. A line-like thing appears at the end of the white print surface
3.Can varnish banding be reduced?
4. Are there many problems with China’s UV Printer?

7. UV Printer Application 

we are explaining not only UV printer problems and solutions, but also what products are produced with UV printers.

1. Braille printing
2. Flip the material and align it
3. 2.5D UV print
4. ARTJET UV Printer Application 6 _아크릴 본딩 장비
5. I phone 14 print limitation 
6. Mask printing not recommend
7. Leather Cigarette Case UV Printing
8. Round soccer strategy board UV printing
9. Primer  performance & limitation 
10. UV Print & Laser crop mark cutting
11. Mobil case UV print profit
12. Screen vs Digital Comparison and UV Printing on Hand Sanitizer Cases
13. Bottle zig & print
14. Canvas UV Printing
15. Applying epoxy effect with varnish
16. Making a light frame with UV Printer & Laser cutter
17. UV Printer & Laser Cutting Equipment Button Name Tag Making
18. UV Printer & Laser Cutting Making a Cell Phone GripTok
19. Making an Acrylic Keychain with UV Printer & Laser Cutter
20. UV Print with Zig
21. How to make RD WORKS CCD camera cutting Video manual
22. Acrylic bonding equipment
23. All the steps to create UVDTF
24. UVDTF TEST Result on various material
25. ARTJET CW+C Print time & Ink Cost
26. Create a white shield with different images on the front and back of the keyring
27. Keyring Business Required Equipment and Investment Costs
29. Acrylic Lighting Goods
30. Ballpoint pen jig printing
31. Staining occurs when printing on coated leather

 

That’s it for today.