UV printer cutter and jointer Which buy first ARTJET 2025

UV printer cutter and jointer Which buy first

 

So far, I have summarized the information related to UV Printers below. If you click on the article, you will be taken to the link for related information.

24 articles on ink supply issues,
9 articles on head basics,
12 articles on actual head issues and their solutions,
10 actual mechanical Machine Problems and Solutions.
12 Problems and Solutions of Electronic Boards and SW Actually Issued
11 Problems and Solutions: Sai Rip Installation and Basic Settings, Spot Color Creation, and More
We’ve compiled a list of products that can be made with a UV printer.

 

Today, we’ll be talking about the equipment you should buy first: a UV printer, cutter, or bonder.

 

I. What products will you focus on? _UV printer cutter and jointer Which buy first

1. Items with collapsed printing prices _UV printer cutter and jointer Which buy first 

The following items can only be printed with UV printer color. Printing costs have long since collapsed.

 

The items below can be printed in color and white.
While the printing cost has dropped significantly, it’s still better than products that can be produced in color only.

2. The printing price did not collapse, but _UV printer cutter and jointer Which buy first

The items below can be produced using UV printers and laser cutting equipment.
While many manufacturers are producing these items, printing costs have not yet plummeted.

3. Joint keyring _UV printer cutter and jointer Which buy first

The item introduced on YouTube below is a bonded keyring that can be produced with a UV Printer + Laser cutting equipment + bonding equipment.

Joint keyring

While keychains are widely available in China, they don’t sell the keychain equipment themselves.
Japan also doesn’t sell keychain equipment.
Currently, only Korea sells entry-level keychain equipment, and it seems that almost all major companies now have them.

With the increasing number of keychain manufacturers, unit prices are continuing to decline, but they still seem to be doing well.

 

II. Equipment Purchase Priorities _UV printer cutter and jointer Which buy first

1. UV Printer first _UV printer cutter and jointer Which buy first

Since you can’t make any products without a UV printer, the first piece of equipment you should consider is a UV printer.
Even for items with a low printing cost, if you’re running it alone, you may still incur labor costs.
As you slowly expand your client base, and as clients request additional equipment, you can consider purchasing additional equipment.

 

2. Purchase of acrylic jointer + outsourcing of laser cutting _UV printer cutter and jointer Which buy first

Many people choose to purchase a laser cutter first when choosing between a laser cutter and an acrylic bonding machine.

My criteria for choosing a laser cutter is whether it can be outsourced.

Laser cutting can be outsourced, but acrylic bonding is impossible without a personal connection.

Since laser cutting can be outsourced, I believe it’s better to purchase an acrylic bonding machine first.

 

III. Why outsourcing is becoming increasingly difficult _UV printer cutter and jointer Which buy first

1. First from UV Printer company _UV printer cutter and jointer Which buy first     

When cell phone cases were a hot item,
most companies simply printed the occasional acrylic keychain and other goods orders, outsourcing the laser cutting.
Even five years ago, the only laser cutters available in Korea were American or German, costing anywhere from 40 million won to 100 million won.
Of course, Taiwanese products were available, but they were also expensive.
For this reason, companies with UV printers had no incentive to purchase expensive laser cutting equipment for small orders of acrylic goods.

 

However, as merchandise items became increasingly popular,
companies with UV printers increasingly outsourced laser cutting.

At this time, as low-cost Chinese laser cutters became available in Korea,

companies with UV printers began purchasing laser cutting equipment.

 

2. Companies that have laser cutting equipment also _UV printer cutter and jointer Which buy first

When UV printer companies purchased laser cutting equipment and cut their own products,

the laser companies lost their existing cutting orders, and they had to find new products.

Just as inexpensive Chinese laser cutting machines became widespread in Korea, inexpensive Chinese UV printers also began to enter the domestic market around this time.

Seeing the growth of UV printer companies, companies that owned laser cutting machines also began purchasing UV printers.

As they produced the same products,

what had previously been cooperative partnerships naturally became competitors.

Now, with both UV printers and laser cutting machines becoming more affordable, many companies own both equipment.

 

3. Where to use a laser cutter _UV printer cutter and jointer Which buy first   

If you don’t have a laser cutting outsourcing service nearby,

go to a university or local public institution’s startup center,

where you can use a UV printer or laser cutter for a fee.

 

IV. This is how ARTJET supports our customers.

One thing I feel while selling and maintaining ARTJET UV Printers for 5 years is that the next most important thing after product stability is Troubleshooting DATA.

All products have problems, whether they are actual equipment problems or consumer errors, and product stability is how easily and quickly you solve those problems.

We are organizing all the troubleshooting DATA as follows.

You can see the product print quality by clicking here.

1. Additional information on printhead problems

Please refer to the information summarized above, and the additional information summarized below is as follows.

Addition

“After connecting the DATA Cable, one channel is not fired”

 

2. Additional information on ink supply issues

Please refer to the information summarized above, and the additional information summarized below is as follows.

Addition

“no clogged nozzles, but banding in the red ARTJET 2025”
“When I print it, the whole thing has a yellow tint to it”

 

3. Additional problems due to equipment problems or management negligence 

Please refer to the information summarized above, and the additional information summarized below is as follows.

“I see a white line after 600mm on the Y-axis.”

4. Additional information on Electron board and Software issues 

Please refer to the information summarized above, and there is no additional information summarized yet.

5. Additional information on Sai Flexi Rip software  

Please refer to the information summarized above, and there is no additional information summarized yet.

6. Problems and solutions from actual consumer sites

1. Paper that absorbs ink
2. A line-like thing appears at the end of the white print surface
3.Can varnish banding be reduced?
4. Are there many problems with China’s UV Printer?

7. UV Printer Application 

Please refer to the information summarized above, and there is no additional information summarized yet.

 

That’s it for today.